JBL Control 29AV-1 Engineering Speaker Hong Kong Licensed

Extended bandwidth and exceptionally smooth frequency response. 110° x 85° high-frequency coverage with rotatable horn. 110W transformer for 70V or 100V line with 8-ohm thru. SonicGuard™ overload protection. 200mm (8-in) Kevlar cone woofer, 25mm (1-in) titanium diaphragm compression driver. Includes InvisiBall™ mounting hardware, plus ten 6mm attachment points for hanging and optional U-bracket. Sealed input panel cover and screw-secured input terminals.

Frequency range: 37 Hz – 18 kHz (-10 dB)
Power Handling: 300 W continuous programmed power; 150 W continuous pink noise Transformer Taps: 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms Nominal Frequency Response: 45 Hz – 18 kHz ( ± 3 dB)
Maximum SPL (1m): Short-term: 120 dB; Long-term: 114 dB
Nominal sensitivity: 90 dB (2.83V / 1m)
Coverage Angle: 110°H x 85°V, rotatable Directivity Factor (Q): 7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.6 dB average 500 Hz to 16 kHz
Impedance: 8 ohms Minimum impedance: 6.3 ohms @ 230 Hz
Crossover Network: 3rd-order high-pass, 2nd-order low-pass with impedance compensation, 2.5 kHz crossover frequency. Drivers: LF: 200 mm (8 in) Kevlar cone with pure butyl rubber frame, 50 mm (2 in) voice coil in fiberglass frame. HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL Diamond Bezel. Enclosure: High-impact polystyrene. Grille: Thermoset composite-coated steel, WeatherMax multi-layer foam. Overload Protection: Full-range power limiting to protect the network and converters. Serviceable internal fuse for protection in abnormal overload conditions.
Outdoor Capability: IEC 529 IP-X4 rating. Exceeds Mil Spec 810 humidity, salt spray, temperature & UV. Passes Mil-Std-202F salt spray.
Input Connector: Screw-on terminal strip, zinc-plated copper base, gold-over-nickel metal screws/washers. Accepts up to 9 mm outer and 4 mm inner slits (#6, #8, or #10 prongs), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency: Transformer complies with UL1876 Listed Color: Black or White (-WH)
Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net weight (each): 12.2 kg (26.8 lb.)
Shipping weight (each): 14.0 kg (30.8 lb.)
Included accessories: 1 MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall hex key.
Optional Accessories: MTC-29CM For ceiling mounting the speaker. MTC-29UB U-bracket Mounting Hardware: Includes InvisiBall™ Adjustable Wall Mounting System. Optional U-bracket.