JBL Intellivox DSX180/DSX280/DSX380 (Official Version)

The Intellivox-DSX180 is ideal for smaller, less reverberant environments, enhancing speech intelligibility. It can also serve as a filler system for larger Intellivox installations, providing coverage in shaded areas. A single Intellivox-DSX180 can cover an area of ​​up to 25m while maintaining uniform sound pressure levels in the audience area. Ten custom-designed 4-inch speakers and four 1-inch dome tweeters are driven by an eight-channel Class D amplifier and powered by a precision-switched mode power supply, ensuring years of reliable operation.

The dome tweeter in the DSX unit not only improves high-frequency coverage but also enhances the system's subjective sound quality for both speech and music. Extensive monitoring capabilities are implemented to meet the stringent requirements of typical audible alarm (life safety) applications. The unit can be controlled using proprietary WinControl software, providing user-friendly control of beam-guided parameters, audio processing, and monitoring functions. Its moderate array length makes the Intellivox-DSX180 suitable for easy and discreet implementation, even in the most architecturally sensitive environments. The system's low-frequency response can be easily extended with JBL subwoofer systems.

Performance, beamforming, versatility. Exceptional voice clarity, slim and unobtrusive design, extended frequency response up to 18kHz, higher fidelity, wide horizontal diffusion, vertical beamforming (DDS technology), 32-bit floating-point DSP, vertical beamforming control, dual-line input, volume control, latency (up to 20 seconds), 8-band parametric EQ, 8 user-defined, password-protected presets (recallable via third-party control devices), AVC (Automatic Volume Control) via built-in ambient microphone, upgradeable firmware, network-ready, integrated monitoring, emulated via DDA, Catt-Acoustic, Odeon, and EASE 4.3.

Applications of the Intellivox-DSX180: Larger Intellivox installations for fill or delay systems, worship spaces, conference facilities, lecture halls, and A/V demonstration rooms. Options include external ambient noise and temperature sensors, input sections with 1 x 0dBV and 1 x 100V, input sections with 2 x 100V, a full range of mounting accessories, and color matching services.

Software System. WinControl™ directly controls DDC™ drive products for aiming axis, opening angle, and focus distance. It is also used to set other audio parameters, including 8-parameter EQ bands, delay, AVC function, volume level, monitoring related parameters, pilot tone detection, priority switching, and 8 full presets. Enables uploading DDS™ directness files calculated by DDA™ to speakers. RAPID DDS™ allows the creation of DDS™ files to speakers without using DDA™. DDA™ integrates geometric modeling, direct sound prediction, statistical room acoustic prediction, graphical visualization, radiation pattern optimization, and output filter file generation. File transfer to WinControl™ is used for uploading to the speaker DSP unit.

System type: Active beam forming, self-powered columnar loudspeaker array. Maximum SPL output: Continuous 89 dB SPL, Peak 92 dB SPL (30m).
Frequency range (-10dB): Unknown - 18 kHz
Frequency response (±3 dB): Unknown
AC Input: Switching Mode Power Amplifier Design: Class D Eight-Channel System Power Rating: Unknown Output: Unknown Channels: Dual-Wire Input Phantom Power: None High Impedance Selection: None Mixer Output Connector: Unknown Treb/Bass EQ: 8-Band Parametric EQ
System limiter: Onboard DSP
Low-frequency driver: 10 x 4” full-range; High-frequency driver: 4 x 10 mm ferrofluid-cooled tweeter, coaxial mount; Cover pattern: Vertical complex beam formation (through software), wide horizontal diffusion; Crossover frequency: Unknown; Crossover type: Unknown; Housing: Stainless steel (AISI 304) with epoxy coating; Suspension/mounting: Multiple options; Handle: None; Speaker grille: Unknown; Dimensions (H x W x D): 1780mm x 134mm x 92mm
Net weight: 19kg (41.8 lb)
Microphone input: Built-in ambient microphone
EQ: 8-band parameter EQ
Effect: Delay up to 20 seconds, AVC
Input: 1 x 0dBV and 1 x 100V or 2 x 100V

The Intellivox-DSX280 is ideal for medium- to low-reverberation environments, enhancing speech intelligibility. It can also serve as a filler system for larger Intellivox installations, providing coverage in shaded areas. A single Intellivox-DSX280 can cover an area of ​​up to 35m while maintaining uniform sound pressure levels in the audience area. Twelve custom-designed 4-inch speakers and four 1-inch dome tweeters are driven by an eight-channel Class D amplifier powered by a precision-switched mode power supply, ensuring years of reliable operation.

The dome tweeter in the DSX unit not only improves high-frequency coverage but also enhances the system's subjective sound quality for both speech and music. Extensive monitoring capabilities are implemented to meet the stringent requirements of typical audible alarm (life safety) applications. The unit can be controlled using proprietary WinControl software, providing user-friendly control of beam-guided parameters, audio processing, and monitoring functions. Its moderate array length makes the Intellivox-DSX280 suitable for easy and discreet implementation, even in the most architecturally sensitive environments. The system's low-frequency response can be easily extended with JBL subwoofer systems.

Performance, beamforming, versatility. Exceptional voice clarity, slim and unobtrusive design, extended frequency response up to 18kHz, higher fidelity, wide horizontal diffusion, vertical beamforming (DDS technology), 32-bit floating-point DSP, vertical beamforming control, dual-line input, volume control, latency (up to 20 seconds), 8-band parametric EQ, 8 user-defined, password-protected presets (recallable via third-party control devices), AVC (Automatic Volume Control) via built-in ambient microphone, upgradeable firmware, network-ready, integrated monitoring, emulated via DDA, Catt-Acoustic, Odeon, and EASE 4.3.

Applications of the Intellivox-DSX280: Larger Intellivox installations for fill or delay systems, worship spaces, conference facilities, lecture halls, and A/V demonstration rooms. Options include external ambient noise and temperature sensors, input sections with 1 x 0dBV and 1 x 100V, input sections with 2 x 100V, a full range of mounting accessories, and color matching services.

Software System. WinControl™ directly controls DDC™ drive products for aiming axis, opening angle, and focus distance. It is also used to set other audio parameters, including 8-parameter EQ bands, delay, AVC function, volume level, monitoring related parameters, pilot tone detection, priority switching, and 8 full presets. Enables uploading DDS™ directness files calculated by DDA™ to speakers. RAPID DDS™ allows the creation of DDS™ files to speakers without using DDA™. DDA™ integrates geometric modeling, direct sound prediction, statistical room acoustic prediction, graphical visualization, radiation pattern optimization, and output filter file generation. File transfer to WinControl™ is used for uploading to the speaker DSP unit.

System type: Active beam forming, self-powered columnar loudspeaker array. Maximum SPL output: Continuous 90 dB SPL, Peak 93 dB SPL (30m).
Frequency range (-10dB): 50 Hz - 18 kHz
Frequency response (±3 dB): Unknown
AC Input: Switching Mode Power Amplifier Design: Class D Eight-Channel System Power Rating: Unknown Output: Unknown Channels: Dual-Wire Input Phantom Power: None High Impedance Selection: None Mixer Output Connector: Unknown Treb/Bass EQ: 8-Band Parametric EQ
System limiter: Onboard DSP
Low-frequency driver: 12 x 4” full-range; High-frequency driver: 4 x 10 mm ferrofluid-cooled tweeter, coaxial mount; Cover pattern: Vertical complex beam formation (through software), wide horizontal diffusion; Crossover frequency: Unknown; Crossover type: Unknown; Housing: Stainless steel (AISI 304) with epoxy coating; Suspension/mounting: Multiple options; Handle: None; Speaker grille: Unknown; Dimensions (H x W x D): 2800mm x 134mm x 92mm
Net weight: 25kg (55 lb)
Microphone input: Built-in ambient microphone
EQ: 8-band parameter EQ
Effect: Delay up to 20 seconds, AVC
Input: 1 x 0dBV and 1 x 100V or 2 x 100V

The Intellivox-DSX380 is ideal for larger, less reverberant environments, enhancing speech intelligibility. It can also serve as a filler system for larger Intellivox installations, providing coverage in shaded areas. A single Intellivox-DSX380 can cover an area of ​​up to 45m while maintaining uniform sound pressure levels in the audience area. Sixteen custom-designed 4-inch speakers and four 1-inch dome tweeters are driven by a sixteen-channel Class D amplifier and powered by a precision-switched mode power supply, ensuring years of reliable operation.

The dome tweeter in the DSX unit not only improves high-frequency coverage but also enhances the system's subjective sound quality for both speech and music. Extensive monitoring capabilities are implemented to meet the stringent requirements of typical audible alarm (life safety) applications. The unit can be controlled using proprietary WinControl software, providing user-friendly control of beam-guided parameters, audio processing, and monitoring functions. Its moderate array length makes the Intellivox-DSX380 suitable for easy and discreet implementation, even in the most architecturally sensitive environments. The system's low-frequency response can be easily extended with JBL subwoofer systems.

Performance, beamforming, versatility. Exceptional voice clarity, slim and unobtrusive design, extended frequency response up to 18kHz, higher fidelity, wide horizontal diffusion, vertical beamforming (DDS technology), 32-bit floating-point DSP, vertical beamforming control, dual-line input, volume control, latency (up to 20 seconds), 8-band parametric EQ, 8 user-defined, password-protected presets (recallable via third-party control devices), AVC (Automatic Volume Control) via built-in ambient microphone, upgradeable firmware, network-ready, integrated monitoring, emulated via DDA, Catt-Acoustic, Odeon, and EASE 4.3.

Applications of the Intellivox-DSX380: Larger Intellivox installations for fill or delay systems, worship spaces, conference facilities, lecture halls, and A/V demonstration rooms. Options include external ambient noise and temperature sensors, input sections with 1 x 0dBV and 1 x 100V, input sections with 2 x 100V, a full range of mounting accessories, and color matching services.

Software System. WinControl™ directly controls DDC™ drive products for aiming axis, opening angle, and focus distance. It is also used to set other audio parameters, including 8-parameter EQ bands, delay, AVC function, volume level, monitoring related parameters, pilot tone detection, priority switching, and 8 full presets. Enables uploading DDS™ directness files calculated by DDA™ to speakers. RAPID DDS™ allows the creation of DDS™ files to speakers without using DDA™. DDA™ integrates geometric modeling, direct sound prediction, statistical room acoustic prediction, graphical visualization, radiation pattern optimization, and output filter file generation. File transfer to WinControl™ is used for uploading to the speaker DSP unit.

System type: Active beam forming, self-powered columnar loudspeaker array. Maximum SPL output: Continuous 91 dB SPL, Peak 94 dB SPL (30m).
Frequency range (-10dB): 130 Hz - 18 kHz
Frequency response (±3 dB): Unknown
AC Input: Switching Mode Power Amplifier Design: Class D 16-Channel System Power Rating: Unknown Output: Unknown Channels: Dual-Wire Input Phantom Power: None High Impedance Selection: None Mixer Output Connector: Unknown Tweet/Blow EQ: 8-Band Parametric EQ
System limiter: Onboard DSP
Low-frequency driver: 16 x 4” full-range; High-frequency driver: 4 x 10 mm ferrofluid-cooled tweeter, coaxial mount; Cover pattern: Vertical complex beam formation (through software), wide horizontal diffusion; Crossover frequency: Unknown; Crossover type: Unknown; Housing: Stainless steel (AISI 304) with epoxy coating; Suspension/mounting: Multiple options; Handle: None; Speaker grille: Unknown; Dimensions (H x W x D): 3750mm x 134mm x 92mm
Net weight: 35kg (77 lb)
Microphone input: Built-in ambient microphone
EQ: 8-band parameter EQ
Effect: Delay up to 20 seconds, AVC
Input: 1 x 0dBV and 1 x 100V or 2 x 100V