JBL Intellivox HP-DS180 / HP-DS370 Hong Kong Official Version

The JBL Professional® Intellivox HP-DS170 is a direct-control digital beam-guided array loudspeaker designed for high-performance audio applications. It is constructed as a line array of ten 6.5-inch loudspeakers and two coaxial-mounted HF compression drivers. All necessary signal processing functions are built into the loudspeaker housing, including the audio input module, two input/twelve-channel DSP, twelve power amplifiers, and a switching power supply. There is no internal fan. The input section is transformer balanced. All array signal processing is implemented in the digital domain using a 900 MFLOPS 32-bit DSP.

The speaker housing is made of stainless steel with an epoxy coating and has two bracket attachment points at the rear. The protective front is a perforated steel grille. The unit meets IP 55 enclosure protection standards. Preset colors: Housing and grille RAL 9010 (white), speaker baffle RAL 9011 (black). Dimensions: 1698mm x 198mm x 189mm. Weight: 56kg.

Performance, beamforming, versatility. Exceptional voice clarity, slim and unobtrusive design, extended frequency response up to 18kHz, higher fidelity, wide horizontal diffusion 100°, vertical beamforming (DDS technology), 32-bit floating-point DSP, vertical beamforming control, dual-line input, volume control, latency (up to 21 seconds), parametric EQ, user presets, AVC (automatic volume control) via built-in ambient microphone, upgradeable firmware, network ready, integrated monitoring.

Applications of the Intellivox HP-DS170: High-performance audio applications, such as public address systems, require precise beam guidance and ambient noise compensation. Options include external ambient noise and temperature sensors, a full range of mounting accessories, and color matching services.

Software system. WinControl™ is used for control and monitoring. DDA™ is used for modeling and calculating the DDS beam formation algorithm.

System type: Active beam forming, self-powered columnar loudspeaker array. Maximum SPL output: Continuous 97 dB SPL, Peak 105 dB SPL (30m).
Frequency range (-10dB): 140 Hz - 18 kHz
Frequency response (±3 dB): 140 Hz - 18 kHz
AC input: 100-240V 50/60 Hz
Amplifier Design: Class D 12-channel system; Power Rating: 12 x 100 W RMS
Output: Unknown; Channels: Dual-wire input + 100V input; Phantom power: None; High impedance selection: None; Mixer output connector: Unknown; Treb/Bass EQ: Parametric EQ
System limiter: Onboard DSP
Low-frequency driver: 10 x 6.5”
High-frequency drivers: 2 x 1” compression drivers, coaxial mounting. Cover pattern: 100° horizontal, vertical defined by DDS algorithm. Crossover frequency: Unknown. Crossover type: Unknown. Housing: Stainless steel (AISI 304) with epoxy coating. Suspension/mounting: Two brackets. Accessory point handle: None. Speaker grille: Perforated steel. Dimensions (H x W x D): 1698mm x 198mm x 189mm
Net weight: 56kg (123 lb)
Microphone input: Built-in ambient microphone
EQ: Parameter EQ
Effect: Delay up to 21 seconds, AVC
Inputs: 2 x 0 dBV and 1 x 100V

The JBL Professional® Intellivox HP-DS370 is a direct-control digital beam-guided line array loudspeaker designed for high-performance audio applications. It is constructed as a line array of fourteen 6.5-inch speakers and two coaxial-mounted HF compression drivers, positioned according to a patented design. All signal processing is integrated into the housing, including the audio input module, two input/sixteen-channel DSP, sixteen power amplifiers, and a switching power supply. There is no internal fan. The input section is transformer balanced. Signal processing is handled digitally by a 900 MFLOPS 32-bit DSP.

The speaker housing is made of stainless steel with an epoxy coating and has two bracket attachment points at the rear. The protective front is a two-piece perforated steel grille. The unit meets IP 55 enclosure protection standards. Preset colors: Housing and grille RAL 9010 (white), speaker baffle RAL 9011 (black). Dimensions: 3738mm x 198mm x 189mm. Weight: 82kg.

Performance, beamforming, versatility. Exceptional voice clarity, slim and unobtrusive design, extended frequency response up to 18kHz, higher fidelity, wide horizontal diffusion 100°, vertical beamforming (DDS technology), 32-bit floating-point DSP, vertical beamforming control, dual-line input, volume control, latency (up to 21 seconds), parametric EQ, user presets, AVC (automatic volume control) via built-in ambient microphone, upgradeable firmware, network ready, integrated monitoring.

Applications of the Intellivox HP-DS370: High-performance audio applications, such as public address systems, require precise beam guidance and ambient noise compensation. Options include external ambient noise and temperature sensors, a full range of mounting accessories, and color matching services.

Software system. WinControl™ is used for control and monitoring. DDA™ is used for modeling and calculating the DDS beam formation algorithm.

System type: Active beam forming, self-powered columnar loudspeaker array. Maximum SPL output: Continuous 97 dB SPL, Peak 105 dB SPL (30m).
Frequency range (-10dB): 140 Hz - 18 kHz
Frequency response (±3 dB): 140 Hz - 18 kHz
AC input: 100-240V 50/60 Hz
Amplifier Design: Class D 16-channel system; Power Rating: 16 x 100 W RMS
Output: Unknown; Channels: Dual-wire input + 100V input; Phantom power: None; High impedance selection: None; Mixer output connector: Unknown; Treb/Bass EQ: Parametric EQ
System limiter: Onboard DSP
Low-frequency driver: 14 x 6.5”
High-frequency drivers: 2 x 1” compression drivers, coaxial mounting. Cover pattern: 100° horizontal, vertical defined by DDS algorithm. Crossover frequency: Unknown. Crossover type: Unknown. Housing: Stainless steel (AISI 304) with epoxy coating. Suspension/mounting: Two brackets. Accessory point handle: None. Speaker grille: Perforated steel. Dimensions (H x W x D): 3738mm x 198mm x 189mm
Net weight: 82kg (181 lb)
Microphone input: Built-in ambient microphone
EQ: Parameter EQ
Effect: Delay up to 21 seconds, AVC
Inputs: 2 x 0 dBV and 1 x 100V