Product Safety, Our Mission
ENA Series™ Soundproof Panels & Acoustic Foam Technical Index
01 Soundproof & Acoustic Panel Specs
Residential and commercial acoustic treatments in Hong Kong require selecting insulation foam, absorptive panels, or composite boards matched to specific noise frequencies:
| Material Category | Physical Structure | Metric (NRC / STC) | Target Noise & Applications |
|---|---|---|---|
| High-Density Polyester Acoustic Panels | Porous thermally bonded fiber | NRC 0.3 | Reduces reverberation (RT60) | Surface-mounted interior panels that absorb mid-to-high frequency reflections and eliminate echo in bedrooms, music rooms, classrooms, and offices. |
| Mass-Loaded Damping Blankets | High-gravity polymer barrier roll | Raises wall STC | Dampens low-frequency vibration | Blocks low-frequency bass, footsteps, and pipe noise inside stud wall cavities, suspended ceilings, and floor underlays. |
| Sandwich Composite Soundproof Boards | Dual high-density boards with damping core | High weighted Rw | Multi-layer mass barrier | Engineered for airborne noise isolation, blocking neighbour voices and TV sound across thin party walls, brick walls, and drywall partitions. |
| Acoustic & Thermal Glass Wool | Porous mineral fiber roll | Cavity sound absorption & thermal insulation | Installed inside concealed drywall partitions and ceiling cavities to eliminate hollow-wall resonance and improve partition STC ratings. |
| Slat Wood Acoustic Panels | Timber veneer slats on acoustic felt backing | Combined sound diffusion & mid-band absorption | Controls standing waves and flutter echo across living room feature walls, conference rooms, auditoriums, and commercial interiors. |
02 STC vs. NRC Acoustic Principles
- Indoor Sound Absorption (Acoustic Foam & Absorptive Panels): Porous fiber structures absorb sound wave reflections inside a room to reduce echo and improve speech, music practice, or recording clarity. Performance is rated by the Noise Reduction Coefficient (NRC) from 0 to 1, where higher values indicate stronger echo reduction.
- Through-Wall Sound Insulation (Soundproof Panels & Damping Blankets): Blocking neighbour speech, TV audio, or outdoor traffic noise through walls requires high surface mass and viscoelastic damping. Performance is rated in decibels by Sound Transmission Class (STC) or Weighted Sound Reduction Index (Rw).
- Composite Wall Assemblies: For music practice rooms, home cinemas, or severe neighbour noise, multi-layer partitions combine cavity infill, damping blankets, air gaps, and composite soundproof boards. See our Soundproofing Engineering solutions for structural details.
03 BS 476 Fire & Safety Standards
Conventional polyurethane egg-crate foam carries high flammability and off-gassing risks. Architectural acoustic materials adhere to laboratory-verified safety standards:
| Safety Parameter | Testing & Standard | Residential & Commercial Compliance |
|---|---|---|
| Fire Retardancy Testing | SGS Hong Kong | BS 476 Part 6 & Part 7 | Evaluates surface spread of flame and heat release indices, meeting fire safety requirements for Hong Kong schools, offices, and residential interiors. |
| Formaldehyde Emission Testing | Super E0 Formaldehyde-Free | Ensures odorless installation with zero harmful volatile emissions across bedrooms, nurseries, and enclosed music rooms. |
| Exposed vs. Cavity Material Safety | Binder-free thermal polyester bonding | Surface-mounted polyester panels release zero loose fiberglass particles for safe exposed indoor use, while glass wool rolls are designated for sealed partition cavities. Certificates are archived on our Test Reports page. |
04 Adhesive Mounting & Coverage
- Wall Surface Preparation: Prior to DIY adhesive mounting, painted walls must be clean, dry, flat, and free of loose plaster or dust. Peeling wallpaper should be removed beforehand to ensure lasting bond strength.
- Adhesive Coverage: Lightweight acoustic panels bond directly onto painted walls without drilling by applying construction adhesive (such as Selleys Liquid Nails) around the perimeter and in a zigzag pattern on the back. One standard cartridge installs approximately 1.5 to 2 square meters.
- Joint Sealing: When installing party-wall soundproof boards, fill panel joints, wall perimeters, and socket cutouts with acoustic sealant to prevent sound leakage through micro-gaps.
- Area Calculation: Multiply wall width (m) by height (m) and allow 5% to 8% extra for trimming around door frames and electrical switches, or estimate box quantities via our online Acoustic Material Calculator.